Axle Link Mount Shock Combo 2 5/8" Wide - 0 Degree - 9/16" Bolt Hole MSRP: Was: Now: $56.00 Add to Cart
Axle Link Mount Shock Combo 2 5/8" Wide - 10 Degree - 9/16" Bolt Hole MSRP: Was: Now: $56.00 Add to Cart
Axle Link Mount Shock Combo 2 5/8" Wide - 0 Degree - 9/16" Bolt Hole When we are building a rig more time than not we find ourselves asking “Where are we going to put all this stuff”? So we set out to try to find a way to most efficiently package our lower control arm... MSRP: Was: Now: $56.00 Add to Cart
Axle Link Mount Shock Combo 2 5/8" Wide - 10 Degree - 9/16" Bolt Hole When we are building a rig more time than not we find ourselves asking “Where are we going to put all this stuff”? So we set out to try to find a way to most efficiently package our lower control arm... MSRP: Was: Now: $56.00 Add to Cart
Behind The Axle Shock Bracket Barnes 4WD behind the axle shock bracket is one of the most versatile shock brackets that we make. This shock brackets allows you to orient the shock bolt perpendicular to the axle tube to help... MSRP: Was: Now: $25.64 Add to Cart
Bent & Curved - Tube Shock Bracket Pair This shock mount is the "best of the best", it is bent for strength and curved for clearance. This bracket is laser cut for effortless fitment to your chassis tube work. Like all of our brackets we... MSRP: Was: Now: $14.78 Add to Cart
Bent - Axle Shock Bracket Pair This is our most popular shock bracket. It is designed to be mounted on top of the axle to increase clearance and minimize shock damage. This bracket is designed for the shock bolt to be... MSRP: Was: Now: $14.78 Add to Cart
Bent - Flat Bottom Shock Bracket Pair This is a very diverse shock mount. It is designed to be mounted to any flat surface. This shock mount is laser cut and formed from 1/4" thick plate steel, it has an inside width of 1 1/2" and the... MSRP: Was: Now: $14.78 Add to Cart
Bent - Tube Shock Bracket Pair This is our most popular tube chassis shock bracket. This bracket is designed for the shock bolt to be parallel to the tube, this helps to prevent the shock eye from binding during axle articulation,... MSRP: Was: Now: $14.78 Add to Cart
Dana 60 ARP High Steer Stud Set of1 ARP stud and nut to attach high steer arms to kingpin Dana 60 knuckles. Add two of these to your order if you have Dana 60 High steer arms with a fifth hole. MSRP: Was: Now: $8.75 Add to Cart
Dana 60 ARP High Steer Studs Set of 8 ARP studs and nuts to attach high steer arms to kingpin Dana 60 knuckles. One kit does both left and right knuckles. MSRP: Was: Now: $76.00 Add to Cart
Dana 60 Grade 10.9 High Steer Stud Set of 1Grade 10.9stud and nut to attach high steer arms to kingpin Dana 60 knuckles. Add two of these to your order if you have Dana 60 High steer arms with a fifth hole. MSRP: Was: Now: $6.25 Add to Cart
Dana 60 Grade 10.9 High Steer Studs Set of 8Grade 10.9studs and nuts to attach high steer arms to kingpin Dana 60 knuckles. One kit does both left and right knuckles. MSRP: Was: Now: $56.00 Add to Cart
Dana 60 High Steer Arms Need to get your crossover steering up out of the way? Barnes 4WD has you covered. Our Dana 60 Hi-steer arms have several design characteristics to improve strength and functionality of your Dana 60... MSRP: Was: Now: $215.00 Add to Cart
Flat Bottom - Shock Mount Tabs Pair This is one of our most versatile shock tabs, it can be used for many other applications. This tab is intended to be welded to any square surface. This tab is laser cut from 1/4" plate steel, it... MSRP: Was: Now: $4.75 Add to Cart
Frame Shock Tower Pair Barnes 4WD Frame shock towers are great way to get your Air shocks, Coilovers or ORI struts out mounted to your frame. These shock towers are made from ¼" steel. Sure we could have made them out of... MSRP: Was: Now: $135.00 Add to Cart
Frenched Shock Tower Pair Barnes 4WD Frenched shock towers are great way to get your Air shocks, Coilovers or ORI struts out boarded so they can work to their full potential. These shock towers are made from ¼" steel. Sure we... MSRP: Was: Now: $125.00 Add to Cart
Heavy Duty Steering Kit with 3/4" Heims Kit Includes One 4' and one 5' piece of 1 1/2"OD 1/4" Wall DOM Four Heat Treated Chromalloy Heims with 3/4" Shank One Right Hand One Left Hand ¾-16 x 3/4" Heim One Right Hand One Left Hand ¾-16 x... MSRP: Was: Now: $220.00 Add to Cart
Helmet Keeper Hook Safety should always be a concern out on the trail, and a helmet is one of the most important safety items that you can carry, with our helmet keeper hook we have made being safe a little easier. If... MSRP: Was: Now: $3.69 Add to Cart
Square - Shock Mount Tabs Pair This is one of our most versatile shock tabs, it can be used for many other applications. This tab is intended to be welded to any square surface. This tab is laser cut from 1/4" plate steel, it... MSRP: Was: Now: $4.75 Add to Cart
Trick Tab These tabs work great for lights, attaching body panels and ton of other things. Tab measures approximately 1 ½" x 1 ½" and is cut from 1/8" material. MSRP: Was: Now: $1.20 Add to Cart
Tube - Shock Mount Tabs Pair This is one of our most versatile shock tabs, it can be used for many other applications. This tab is intended to be welded to any chassis tube work. This tab is laser cut from 1/4" plate steel, it... MSRP: Was: Now: $4.75 Add to Cart
