8" Toyota 4Cyl Lock Right (2 Pinion)

Powertrax Lock Right LockerToyota 8" Solid Axle30 Spline Axles Rear/Front Differential: Toyota 8" Straight AxleManufacturer: Richmond Gear/PowertraxPart # 1610Warranty: 2 YearsVehicle Applications: 1979-1995 Toyota 4x4 Hilux Pickup w/ 22R or 22RE (Rear...

US Mags C-Ten - U129 C10 wheel package. 20x8.5, 20x10

C10 Pickup wheel package. 5x5 Bolt pattern. 2) 20x8.5, 5"BS 2) 20x10, 5.5BS wheels. Please message us for package pricing with tires mounted and balanced.     C-Ten - U129 FINISH: Anthracite & Milled w/ Diamond Cut...

"Y" Link Steering using GM 1 Ton TRE

"Y" Link Steering using GM 1 Ton TREThis is your not so basic steering setup that mocks the factory setup with easier adjustment & much stronger tubing. The kit can be used with stock steering position on the knuckle or High Steer arms. The...

03 and up Explorer 5 LUG axle W/O traction control, Right hand, 8.8", 31spline. This in an independent rear suspension CV shaft. Does not fit sport trac.

03 and up Explorer 5 lug axle, left hand, 8.8", 31 spline, W/ traction control. This in an independent rear suspension CV shaft. Does not fit sport trac.

03 and up Explorer 5 lug axle, left hand, 8.8", 31spline, W/O traction control. This in an independent rear suspension CV shaft. Does not fit sport trac.

03 and up Explorer 5 LUG axle, Right hand, 8.8", 31spline, W/ traction control. This in an independent rear suspension CV shaft. Does not fit sport trac.

08+ Toyota 9.5" Land Cruiser / Tundra Outer Pinion Bearing/Race, For Use W/ OEM 32 Spline Pinion

http://www.justdifferentials.com/ProductDetails.asp?ProductCode=TOY90366-A0014

1-1/4" - 12 Jam Nut LH

1.25" -12 tpi Jam Nut These are a basic necessity for every DIY Fabricator. No matter if you are building a four link set up for you new rock crawler or you own heavy duty steering linkage for your trail rig you have to have them.

1-1/4" - 12 Jam Nut RH

1 1/4" -12 tpi Jam Nut These are a basic necessity for every DIY Fabricator. No matter if you are building a four link set up for you new rock crawler or you own heavy duty steering linkage for your trail rig you have to have them.

1/2" - 20 Jam Nut LH

1/2 -20 tpi Jam Nut These are a basic necessity for every DIY Fabricator. No matter if you are building a four link set up for you new rock crawler or you own heavy duty steering linkage for your trail rig you have to have them.

1/2" - 20 Jam Nut RH

1/2 -20 tpi Jam Nut These are a basic necessity for every DIY Fabricator. No matter if you are building a four link set up for you new rock crawler or you own heavy duty steering linkage for your trail rig you have to have them.

12P GM 3.08 Ring & Pinion

http://www.justdifferentials.com/ProductDetails.asp?ProductCode=GM12P-308-RG

12P GM 3.55 Ring & Pinion

http://www.justdifferentials.com/ProductDetails.asp?ProductCode=GM12P-355-RG

12P GM 5.86 Ring & Pinion

http://www.justdifferentials.com/ProductDetails.asp?ProductCode=GM12P-586-RG

12T 5 Lug conversion axle, 65-69 30 ¾" early 30-spline 5X5 bolt pattern. Yukon 1541H alloy axles offer a strength increase over stock while retaining a low cost. Yukon 1541H alloy rear axles come with a five year warranty against manufacturing defect

12T GM 4.56 Thick Ring & Pinion (Fits 2.76-3.42 Case)

http://www.justdifferentials.com/ProductDetails.asp?ProductCode=GM12T-456T-RG

12T GM 4.88 Ring & Pinion

http://www.justdifferentials.com/ProductDetails.asp?ProductCode=GM12T-488-RG

12T GM 5.13 Ring & Pinion

http://www.justdifferentials.com/ProductDetails.asp?ProductCode=GM12T-513-RG

12T GM 5.38 Ring & Pinion (Needs Notched X-Pin)

http://www.justdifferentials.com/ProductDetails.asp?ProductCode=GM12T-538-RG

14 Bolt Axle Swap Combo

Our axle swap combo's are the best of the best, with these combo's you will be saving a 10% discount off our all ready low prices.  When it comes to changing axles in a leaf sprung rig you want to get it right the first time, and forget about it.  Like...

14 Bolt Competition Axle Truss

Motobilt has been fabricating the 14 Bolt Competition Axle Truss since 2013. This particular axle truss is the definition of heavy duty.  This version of the 14 bolt truss is essentially two trusses in one.  If you notice, in the center over...

14 Bolt Diff Cover Mounting Hardware

Thirteen new longer grade 8 bolts for your new 14 bolt shave cover.

14 Bolt Fabricated 3/8" differential cover

Ring and Cover are 3/8" thick A50 plate steel CNC bent 8 ways Machined absolutely flat for a perfect fit All seams welded inside and out Bolt kit IS included with this cover This is our basic differential cover, we see it as the only one worth making...